A premium offering by Benjamin Moore. This waterborne acrylic urethane primer/sealer is renowned for its unparalleled bonding capabilities, especially on challenging surfaces like PVC, vinyl, plastic, glass, and even painted surfaces. Whether you're dealing with shiny tiles, siding, fiberglass, or metal, the INSL-X Primer ensures a firm grip.
🚚 Free Worldwide Shipping on All Orders!Shop Now
INSL-X Stix Waterborne Bonding Primer by Benjamin Moore
Experience the Unmatched Adhesion of INSL-X Stix Bonding Primer.
- Good For
- Limitations
Why Choose INSL-X Stix Waterborne Bonding Primer?
Versatility: Perfect for both indoor and outdoor applications. It's a primer that's compatible with a range of coatings, from Alkyd and Acrylic Latex to Urethane, Epoxy, and Lacquer finishes.
Ease of Use: With its smooth leveling properties, you're guaranteed a flawless finish every time. And when you're done? A simple soap and water clean-up is all you need.
Performance: Once cured, it forms an exceptionally hard film, ensuring excellent enamel holdout. It's ideal for plaster, drywall, wood, and even in low-temperature environments.
Quick Drying: Ready for a re-coat in just 3-4 hours.
Wondering where to buy INSL-X Stix Waterborne Bonding Primer? Look no further. We guarantee a genuine INSL-X Stix product, ensuring you only get the best!
Highlights:
Super adhesion, even on glossy surfaces.
Cure efficiently at temperatures as low as 35°F (1.7°C).
Exceptional enamel holdout for a lasting finish.
Easy soap & water clean-up.
Suitable for both interior and exterior use.
- Apply when air, surface and product temperature are above
1.7 °C (35 °F) - Do not apply in direct sunlight or on a hot surface. Avoid rain, moisture or high humidity for the first 24 hours of curing.
- Not intended for immersion service or continuous water contact. Not for below grade applications.
- Not recommended for use over polyethylene or polypropylene. Stix® must be top coated for exterior use.
- Not recommended over Kynar® (and similar finishes) unless tested and approved by the buyer.
- Not recommended as a whole house exterior primer over wood.
SPECIAL NOTE ON SURFACE PREPARATION:
Glossy Surfaces – Although Stix® is formulated to be applied to hard to coat surfaces without the need for sanding, it is recommended that proper surface preparation still be completed to enhance adhesion properties. Surfaces such as Formica®, ceramic tile and glossy painted surfaces should be properly de-glossed. Once applied, allow Stix® to cure for approximately 3 to 4 days to achieve maximum resistance to scrape off. However, Stix® may be top-coated with a quality latex or oilbased finish
Select Finish
Select Colour
Select Size
From $6.35
Original: $21.17
-70%INSL-X Stix Waterborne Bonding Primer by Benjamin Moore—
$21.17
$6.35Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Experience the Unmatched Adhesion of INSL-X Stix Bonding Primer.
A premium offering by Benjamin Moore. This waterborne acrylic urethane primer/sealer is renowned for its unparalleled bonding capabilities, especially on challenging surfaces like PVC, vinyl, plastic, glass, and even painted surfaces. Whether you're dealing with shiny tiles, siding, fiberglass, or metal, the INSL-X Primer ensures a firm grip.
- Good For
- Limitations
Why Choose INSL-X Stix Waterborne Bonding Primer?
Versatility: Perfect for both indoor and outdoor applications. It's a primer that's compatible with a range of coatings, from Alkyd and Acrylic Latex to Urethane, Epoxy, and Lacquer finishes.
Ease of Use: With its smooth leveling properties, you're guaranteed a flawless finish every time. And when you're done? A simple soap and water clean-up is all you need.
Performance: Once cured, it forms an exceptionally hard film, ensuring excellent enamel holdout. It's ideal for plaster, drywall, wood, and even in low-temperature environments.
Quick Drying: Ready for a re-coat in just 3-4 hours.
Wondering where to buy INSL-X Stix Waterborne Bonding Primer? Look no further. We guarantee a genuine INSL-X Stix product, ensuring you only get the best!
Highlights:
Super adhesion, even on glossy surfaces.
Cure efficiently at temperatures as low as 35°F (1.7°C).
Exceptional enamel holdout for a lasting finish.
Easy soap & water clean-up.
Suitable for both interior and exterior use.
- Apply when air, surface and product temperature are above
1.7 °C (35 °F) - Do not apply in direct sunlight or on a hot surface. Avoid rain, moisture or high humidity for the first 24 hours of curing.
- Not intended for immersion service or continuous water contact. Not for below grade applications.
- Not recommended for use over polyethylene or polypropylene. Stix® must be top coated for exterior use.
- Not recommended over Kynar® (and similar finishes) unless tested and approved by the buyer.
- Not recommended as a whole house exterior primer over wood.
SPECIAL NOTE ON SURFACE PREPARATION:
Glossy Surfaces – Although Stix® is formulated to be applied to hard to coat surfaces without the need for sanding, it is recommended that proper surface preparation still be completed to enhance adhesion properties. Surfaces such as Formica®, ceramic tile and glossy painted surfaces should be properly de-glossed. Once applied, allow Stix® to cure for approximately 3 to 4 days to achieve maximum resistance to scrape off. However, Stix® may be top-coated with a quality latex or oilbased finish
